Product DescriptionFeature: Model: MDS-60Working voltage: DC3-5VStandby current: ≤ 5mAWorking current: ≤40mAMeasure depth: ≤ 60 mmMeasure alarm mode: sound, lightPCB size: 86 x 61mm Package includes: 5 x DIY Metal Measure Kit..

Product DescriptionDescription: Color dot matrix size: approx.30.2*15*0.8cmController size: approx.4.1*8cmAudio splitter length: approx.60cmUSB cable length: approx.103cm16-core data cable length: about 39cmWeight: about 310g (1cm=10mm=0.39inch)Measurement details in the attached picture. Feature: Using the latest SMD dual color dot-..

Product DescriptionFeature: Model: ASD-84SWorking voltage: DC5VStandby current: ≤ 5mAWorking current: ≤35mASignal input method: 3.5mm audio cableLED color: 0805 red, green, blue, yellowPCB size: 64.2mm x 36.5mmPCB mounting hole: 3mmPCB mounting hole spacing: 58.1 x 30.5mmNote: When installing the LED, please keep the same line in the sam..

Product DescriptionFeature: Model: ASD-84SWorking voltage: DC5VStandby current: ≤ 5mAWorking current: ≤35mASignal input method: 3.5mm audio cableLED color: 0805 red, green, blue, yellowPCB size: 64.2mm x 36.5mmPCB mounting hole: 3mmPCB mounting hole spacing: 58.1 x 30.5mmNote: When installing the LED, please keep the same line in the sam..

Product DescriptionFeature: Name: micro: bit acrylic protective shellMaterial: AcrylicColor: Transparent Package includes: 1 x Transparent Acrylic Shell Kit (The development boards does not includes)..

Product DescriptionDescription:· High programming speed.· ISP connector for in-circuit programming.· Advanced and powerful software functions.· Online Technical Support is also available 24 hours.· Can support any flash and very easy to add new flash.· 48-pins powerful pindrivers, no adapter required for an..

Product DescriptionDescription:1. Offline animation increased to 20 species, 4 +1 spectrum modes, each animation has been carefully designed and debugged,the effect is very brilliant.2. The WiFi module and Bluetooth module after careful PCB design and debugging, straight line transmission distance up to 10-20 meters.3. Phone Bluetooth connection, a..

Product DescriptionFeatures: 3 axis stepper motor driverCompatible with micro-drive laser engraving machine, three-axis CNC engraving machine2A can be controlled within the two-phase four-wire stepper motor.Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.Released the I2C interface, you can connect to the LC..

Product DescriptionDescription:Working voltage: DC 5VWork effect: speed can be adjustedSize: 40 x 50mmNote: it is not soldering finished product, it is diy kit.Circuit principle: The circuit is based on the control of the microcontroller, the microcontroller controls the vertical LED lit, so as to achieve the effect of a windmill rotation, you..

Product DescriptionNote:1. This product does not includes housing!! if you need the housing, please purchased separately (Product ID: ).2. This is a DIY kit, you need to have some knowledge of electronics and ability.3. Need a lot of soldering, you should have enough patience.4. 8x8x8 blue lights display version5. APP function only suppor..

Product DescriptionHow it light:Feature: Name: HV-1 high-pressure igniter (DIY kit, you need to assemble it)Input voltage: DC3-5VInput current: 3AOperating current: no less than 2.5AWorking mode: self-excited oscillation boostWorking frequency: about 20KHzContinuous working time: 10 secondsArc length: about 5 mmSize: 71 x 18 x 12mm (L x W x H)..

Product DescriptionNote: This is a DIY kit, you need to assemble it, easy to install, not supply instructions.Working principle: When no light hits the photosensitive resistor, the transistor turns on and the buzzer gets the power to start tweeting. When there is light on the photosensitive resistor, the transistor is turned off, the buzzer is..

Product DescriptionHow it light:Feature: Name: HV-1 high-pressure igniter (DIY kit, you need to assemble it)Input voltage: DC3-5VInput current: 3AOperating current: no less than 2.5AWorking mode: self-excited oscillation boostWorking frequency: about 20KHzContinuous working time: 10 secondsArc length: about 5 mmSize: 71 x 18 x 12mm (L x W x H)..

Product DescriptionFeature: This is a high quality regulated power supply kit with adjustable output voltage from 0-30V and current from 2mA to 3A. When the output current is greater than the set current, LED light, the circuit automatically switches to constant current mode, which can effectively protect the load. Parameter: Mo..

Product DescriptionHow it light:Feature: Name: HV-1 high-pressure igniter (DIY kit, you need to assemble it)Input voltage: DC3-5VInput current: 3AOperating current: no less than 2.5AWorking mode: self-excited oscillation boostWorking frequency: about 20KHzContinuous working time: 10 secondsArc length: about 5 mmSize: 71 x 18 x 12mm (L x W x H)..